riflettenza-solare-tetto
High solar reflectance, emissivity and SRI finishes

Compared to traditional heat-absorbing roofs, heat-reflective paints applied to roofs reflect solar radiation, lower surface temperature and prevent indoor overheating

Indoor comfort

Nanotech inside® paints prevent indoor overheating and make any living and working environment comfortable and cool, preventing the risk of “hot head” syndrome

cicli-termo-efficienti
Energy and cost savings

The significant reduction in the use of air conditioning systems for cooling purposes means tangible energy savings, as well as reduced energy bills.
As a result, CO2 atmospheric emissions are reduced

stress-termici
Protection of roofing materials

The protective action of Nanotech inside® reduces summer thermal stresses, due to continuous expansion and shrinking of building materials, prolonging the life of sheathing layers. They are marked by excellent waterproofing features

Sustainability

Nanotech inside® cool roof products counteract the negative effects of urban heat islands and are an effective tool for combatting global warming

How It Works

The purpose of this coating system is to protect bituminous membranes and roofing systems in general from solar radiation, improving the energy efficiency of treated buildings.

Surface types: smooth or mineral-finished bituminous membranes, aged TPO and PVC membranes, cement, concrete, and similar substrates.

Our company supplies water-based thermoreflective protective coatings specifically designed for roofs, flat roofs, and pitched roofing systems.

If you require an elastomeric liquid membrane or would like to learn more about the benefits of our protective coating solutions, do not hesitate to contact us.

CONTATTACI

Application

Preparation of the substrate

  • Provide suitable hot water washing with oscillating head of all surfaces to be treated, keeping the proper distance, in order to remove any loose parts, dust, traces of dirt, smog, etc.
  • In the presence of algae, apply Lindostop, an antifouling treatment, and take all the necessary precautions to bring the substrate to an ideal state of preparation.
  • In the event of major damage to the bituminous surface or poor adhesion to it, partially replace the damaged parts (cut and sew). Always check that there are no infiltrations or backwashes of water under the sheath that could compromise the final result.

Restoration

On the other hand, in case the existing sheathing is only eroded by time, provide suitable maintenance.

Fixative

After 12 hours on a dry surface, apply a coat of Spot Fix, water-based stain-resistant fixative and insulator.

Finitura

  • Thermo-Gum, elastomeric, liquid, heat-reflecting membrane, with anti-algae properties, for the protection of bituminous membranes and roofs in general, including concrete. Suitable for sloping or flat roofs with a slight stagnation of water.
  • Thermo-Gum Evolution, polyurethane,  liquid, water-based membrane, with heat-reflecting effect, waterproofing, excellent elasticity and good anti-algae properties. It withstands an operating temperature range of -20°C / + 70°C. Excellent adhesion ideal in extreme environments. Suitable for flat roofs, too.
  • Thermo-Gum Walkable, polyurethane, liquid, water-based membrane, with heat-reflecting effect, waterproofing, good elasticity and good anti-algae properties. It has good trampling resistance properties. Suitable for flat roofs, too.

*Before deciding on an application cycle, please consult our technical datasheets and our staff to verify the actual suitability case by case.

Contact us for more information.